Waterproofing Solutions

* Low- viscosity Polymer reactive injection resin
* Good Injectability
* Variable reactivity
* Water displacing
* Limited foaming when directly mixed with water (rigid foam)
* Waterproof
*High Compressive-and tensile strength
*Complying with building material class B2 for fire behaviour acc. to DIN 4102 in the injection medium
*REACH-assessed exposure scenario: long term water-contact, periodical inhalation, application 

Lw+, Dichtament Dm Product Properties • Reduction Of About 15% Of Mixing Water Without Altering The Workability Of The Mix • Does Not Contain Chlorides • Makes It Possible To Control & Maintain The W/c Ratio As Low As Possible • Allows Higher Dispersion And Homogenous Concrete M K T T Ti Ht Chloride Free, Liquid Integral Waterproofing Compound • Makes Concrete Water Tight Areas Of Application • Used As An Admixture For Pre-stressed Concrete • As An Integral Waterproofing Admixture For Concrete • Suitable For Production Of Waterproof Concrete Used In Construction Of Wet Rooms, Concrete Roofs, Basements, Tunnels, Tanks, Swimming Pools, Etc. Application Notes General Dichtament Dm Is An Integral Waterproofing Admixture For Concrete With Good Plasticizing Properties. It Does Not Contain Any Chloride And Can Also Be Used As An Admixture For Pre-stressed Concrete. Th I I F Di H Dm I H B I B Mixing Should Be Continued For At Least One Minute After The Addition Of Dichtament Dm. The Gauging Water Should Be Properly Adjusted Taking Into Account The Water Reduction Brought About Due To The Presence Of Dichtament Dm. The Mixing Of Dichtament Dm In The Concrete Brings About Di H Dm H Ld B Dd D F 0 3 0 % F Contraction Of Capillaries Thereby Rendering The Concrete Dense And Waterproof.   Dichtament Dm Should Be Mixed With Gauging Water Or Can Be Added To Concrete During The Process Of Mixing.further Instructions / Precautions Capillarity Of Concrete Without Use Of Dichtament Dm Reduced Capillarity Of Concrete With Use Of Dichtament Dm Technical Data For Dichtament Dm Characteristic Unit Value Comments Density Kg / Litre 1.10 ± 0.02 Mixing Ratio % By Weight Of Cement 0.3 To 0.5 Minimum 1kg / M3 Of Concrete Mix Should Be Used Product Characteristics For Dichtament Dm Type Of Product Liquid Integral Waterproofing Additive Form Liquid Colour Brown Shelf Life 12 Months From Date Of Manufacture Delivery 230 Kg Barrels, 30 Kg Containers Storage In Unopened Packag G In . Protect From Rain, Direct Sunlig , Ht Heat And Frost Disposal Empty Packs Completely And Dispose Off Carefully To Protect Our Environment Note: The Information On This Data Sheet Is Based On Our Experiences And Correct To The Best Of Our Knowledge. It Is, However, Not Binding. It Has To Be Adjusted To The Individual Structure, Application Purpose And Especially To Local Conditions. Our Data Refers To The Accepted Engineering Rules, Which Have To Be Observed During Application. This Provided We Are Liable For The Correctness Of This Data Within The Scope Of Our Terms And Conditions Of Sale-delivery-and-service. Recommendations Of Our Employees, Which May Differ From The Data Contained In Our Information Sheets, Are Only Binding If Given In Written Form. The Accepted Engineering Rules Must Be Observed At All Times. E. & O.e.

• Low-viscosity polyurethane-based elastomer resin
• Unlimited processing time without contact with water
• Fast reaction on contact with water
• High volume increase within a few seconds
• Stops pressurised water
• Phthalate plasticiser-free
• REACH exposure: water contact permanent, inhalation periodic, processing and application
• Environmental Product Declaration EPD

• Stopping water leakages in water and sewage structures
• Temporary sealing of heavily water-bearing cracks before permanent sealing injection with MC elastomer resins MC-Injekt 2300 top or MC-Injekt 2300 flow

Fast-foaming, one component injection resin for temporary sealing measures