Dhawan Associates

•  Low cost and economical
•   Non-hazardous, non-toxic
•  Ensures good fair-faced concrete
•  Non-staining
•  Minimises cleaning of shutters before re-use
•  Can be used on all types of formwork
•  Does not rust steel moulds or equipment 
•  Does not inhibit application of paints etc to finished concrete (field trials should be conducted) 

Additional Information:

• Delivery Time: 1-2 Days
• Packaging Details: 10 Kg Bucket

Additional Information:

• Delivery Time: 2-3 Days

• See  Side Panel
• Prevents and stops dampness
• Repairs peeling  and  Fungus
• Quick Repair For Roof And Walls

• £ For concrete repairs - Spalled concrete of floors, columns, beams, chhajas, slabs, parapets, etc.
• £ For waterproofing – Small roof terraces, sunken portions of toilets & bathrooms, chhajas & lift pits, balconies& staircases.
• £ For waterproofing – Liquid & effluent tanks, car decks & walkways.
• £ As a bonding agent – Bonding mortar for tiles & panels, as undercoat for special finishes such as top rendering coat for chemical resistant floors.
• £ As a bond coat – For bonding of new concrete to old concrete, masonry stone work, plastering.
• £ For cladding – Fixing or re-fixing of slip bricks, tiles, stones & marble bedding.
• £ As external rendering – Weatherproof & frost resistant render, high wear & erosion resistant render. As bonding slurry coat for pinhole treatment on concrete surface & as repair mortar for overhead application.

• Clean the surface with wire brush or scrubber to remove hidden dirt, loose particles, laitance & dust. Degrease the surface by using suitable solvents.
• £ Repair the spalled concrete portion by saw, cutting the extreme edges of the repair location to a depth of at lease 10 mm to avoid featheredging & to provide strong bond. £ Clean the concrete surface to remove any contamination where breaking is not possible. Roughen the surface by light scabbling or grit blasting.
• £ Expose corroded rebar in the repairing area fully . Remove all loose scales & corrosion deposits and immediately clean the surface

• £ For priming of steel surface, apply Dr. Fixit Rust Remover to all exposed reinforcement area and wash it with water jet before applying Dr. Fixit Epoxy Zinc Rich Primer on the rebars.
• £ For priming of concrete substrate, the surface should be thoroughly saturated with potable water. Remove any excess of water prior to application. Slurry of primer coat is prepared by mixing of one part Dr. Fixit Pidicrete URP, one part of water and 3 parts of fresh OPC cement. Slowly mix cement with binder to obtain a smooth consistency. Continue mixing the slurry during application to prevent settlement.  

• £ A forced action mixer is essential (PAN Mixer) & recommended to ensure that Dr. Fixit Pidicrete URP mortar is thoroughly mixed or Use a suitable sized drum with heavy-duty electrical drill machine fitted with spiral paddle mixer at slow speed of 400-500 rpm.
• £ Hand mixing is permissible only for 25 kg or less quantity.
• £ Charge the mixer with required quantity of clean & dry sand, cement & mix for 1-2 minutes, then add Dr. Fixit Pidicrete URP as per the dosages recommended. Mix for 2-3 minutes to avoid air entrapment. Keep on slowly adding water until the required consistency is achieved. Do not add extra water.

• Styrene Butadiene co-polymer latex liquid that improves waterproofing
• Strengthens bonding of new and old concrete & plaster
• Enhances strength & water resistance of repair mix - concrete & mortar

Kindly send me price and other details.

Products of Interest

Requirements till now

Member since

Available

• Crack Bridging Water proof coating for concrete surfaces on the basis of modified Polyurethane resin.
• Resistance to Oxidation
• Seamless membrane with an Excellent Water Vapor Barrier Properties
• Weathering and ultra violet (UV) resistant and long-term aging stability
• Environmentally friendly, Non-Toxic
• Cured Membranes are highly flexible even at extreme temperature
• Single component, Cold applied, Application by roller or spraying
• It confirms to ASTM C-836 & ASTM C-898

• Outstanding waterproof and damp proof coat for concrete structures, brick and masonry works, cement renders, plasters
• Underground shafts and garages, retaining walls, tunnels, water tanks, roof slabs, sewers and basements
• Resurfacing of bathrooms, cellar walls and floors exposed to dampness and attacks from moss and fungus
• Foundation walls and footings subjected to ground moisture, water and salt efflorescence can be well protected with coating of Dichtament® DS2

Nitoproof 750 is a single-component polyurethane liquid which cures by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane. It is easily applied at the recommended thickness to both vertical and horizontal surfaces.

Advantages

• Pitch free formulation
• High elongation (>600%)
• Australian made
• Non-staining
• Readily applied direct from can - (no mixing required)
• Cures to give permanently flexible resilient barrier over a wide range of temperatures
• Excellent build properties enable application to both horizontal and vertical surfaces
• Can be applied to a wide range of substrates
• Outstanding barrier properties ensure protection against corrosive soil conditions
• Irreversible chemical cure eliminates melting and flow at high temperature
• Excellent resistance to embrittlement

• Bonding agent for bonding of old to new concrete/mortar.
• To extend or repair structural concrete.
• Bonding agent of glazed brick, tiles, steel & structural members.

• Ease of application - Easily applicable by brush as a bonding agent for old to new concrete/mortar.
• Adhesion - Excellent adhesion to almost all building materials.
• Strength - Bond strength exceeds the tensile strength of concrete hence no failure of concrete due to the high degree of movements.
• Open time - Comfortable open time to complete the work easily.
• Shrinkage - Very low shrinkage as compared to polymer modified cementitious bonding agents
• Water resistance - Excellent water resistance and sealing property prevents leakage.
• Toxicity - Non toxic.
• Moisture tolerant - It is moisture tolerant hence provides the strong bond of new concrete to fresh concrete.
• Durability - Very high durable bond.
• Chemical Resistance - Resistant to chemical attack.

• Dr. Fixit Epoxy Bonding Agent should be applied on an old concrete surface.
• Before Dr. Fixit Epoxy Bonding Agent get tack free, apply new concrete or mortar.
• If applied coating gets fully dry then apply 2 nd coat over it.

• As with all chemical products, caution should always be exercised. Protective clothing’s, such as gloves and
• Goggles should be worn.
• Treat any contact to the skin or eyes with fresh water immediately. Should any of the products be accidentally swallowed, do not induce vomiting but call for medical assistance immediately.
• Ensure the pack is available for the medical attendant to examine any relevant instructions and contents details.
• Reseal all containers after use and ensure the product is stored as instructed.
• Do not smoke when handling this product.
• Do not inhale.
• Apply in well-ventilated areas.
• Apply away from naked flames.
• Store away from sunlight.

• Ensures economical durable & optimal waterproofing & protection for exposed roofs, pitched roofs, balconies, terraces, sunshades,
• Thixotropic cold applied component
• Elastic material hence provides good crack bridging.
• Highly economical due to supply in a ready to use form and no wastage of material
• Good UV resistance.

MC-Road Patch is a ready to use concrete repair materialspecially formulated for road patching. Its unique formulatiioncontains special aggregates, binders and fibres to provide adurable repair. The bonding to the substrate and the capacityto absorb static and dynamic loads ensure the theeffectiveness of MC Road Patch

Additional Information:

• Delivery Time: Ready to dispatch
• Packaging Details: 20 Kg Bucket

DSEALBLACK GUARD is a scientific blend of synthetic resins, selected minerals and fillers. Dseal Black Guard is a protective and waterproof coating. It is a high - performance coating that dries to elastic, flexible, impermeable waterproof membrane.

Additional Information:

• Delivery Time: Ready to Dispatch
• Packaging Details: 20 Kg Bucket

Additional Information:

• Delivery Time: 1-2 Days after payment confirmation